Failure to install brake control within these constraints may cause your control to become inoperable. The brake magnets will hum when there is current flowing through them.
Release brake pedal. Repeat Step 3 until power has been set to a point just below wheel lock up or at a sufficient force as to achieve maximum braking power. See Below. Range of adjustment for the level knob.
Too little power can place undue stress on a tow vehicle's braking system, while too much power may cause trailer brakes to lock up while stopping. Repeat the braking and adjustment process until the brake controller has been set to provide sufficient braking power. Traditional Bracket Mount A.
Aggressive NOTE: Level Knob Important Facts to Remember 1. Providing the right amount of power to a trailer's electric braking system is a key component in ensuring efficient stopping.
Traditional Bracket Mount. Manual Slide Knob C. To correct this condition rotate level knob clockwise, toward you, see below.
Fine Tuning Now that the Power has been set, it is time to fine tune the level setting for the majority of the stopping that you will be doing. Bi-Colored Light E.
Turn the power knob, located on the right side of the Tekonsha Voyager brake controller, to the 12 o'clock position. To correct this condition rotate level knob counter-clockwise, away from you, see below.
Connect trailer to tow vehicle.
For Technical Assistance and Warranty Information call: