First clean the area as much as you can. You probably want a professional to do an acid wash if that's your choice. Let it set for a few minutes, then wipe it clean with a soft cloth or towel.
The most important thing you can do regularly to maintain a slate floor is to keep it free of loose dirt and debris. Can I use a steam cleaner on a slate floor?
Preparing a Water-Based Solution of Detergent: Will the steam be able to do the job without harming the slate? Mix it in water according to the package directions.
Slate is a natural stone with a fine texture that comes from small silt and clay particles bonded together under high heat and pressure. We want to clean and seal it. The pads seem to get stuck on the rough edges of the slate and so, the back and forth motion of mopping is cumbersome. A below-surface, or penetrating, sealer will seep down into the material, clogging the pores so that unwanted agents cannot get in.
To clean slate floors, sweep the floor with a soft-bristle broom or vacuum with a brush attachment. Choose a clean dust mop that is not oil-based. Yes No. Slate floors are undoubtedly amazing and are a treat to eyes. Will the steam remove the sealant? Also, never use oil-based cleaners or dust-mop treatments.
What is the best method and products to use? At this moment, I am thinking of having all the slate removed and tile put down.
Apply two or three coats of sealant over the stone or grout with a string mop.
Using Baking Soda and Peroxide: Have you found a solution to this problem? Related Articles.
For colored grout, always test cleaners in an inconspicuous area before using them on the stain. Wait for the bubbles to stop, then put the paste on the stains. Rinse your mop and wring it out often to avoid any debris clinging to it and getting worked into the porous slate. I am selling my home and have a lot of slate.
If you decide to paint your hearth, use water-based urethane and follow with an application of acrylic latex floor enamel.